Panasonic DMC-G2R Operating Instructions Manual Download

Page: 114 / 212

VQT2S42

114

Advanced (Recording pictures)

∫

About the focus mode settings

Focusing changes depending on the focus mode setting and the [CONTINUOUS AF]
setting (P138) in the [MOTION PICTURE] mode menu.

• Depending on the recording conditions or lens used, operational sound may be recorded when

the Auto Focus is operated while recording a motion picture. It is recommended to record with

[CONTINUOUS AF] (P138) set to [OFF], if the sound of operation bothers you to avoid

recording the lens noise.

Note

• Refer to P137 for the [MOTION PICTURE] Mode menu.

• The flash setting is fixed to [

• Available recording time is displayed when the [REMAINING DISP.] (P144) in the [CUSTOM]

menu is set to [REMAINING TIME].

• Refer to P207 for information about the available recording time.

• The available recording time displayed on the screen may not decrease regularly.

• Depending on the type of the card, the card access indication may appear for a while after

recording motion pictures. This is not a malfunction.

• When recording a motion picture, do not cover the microphone with your fingers or other

objects.

Focus mode

[CONTINUOUS AF]

Settings

AFS/AFC

You can have the camera focus

continuously. Alternatively, you can

have the camera focus when you

press the shutter button halfway.

OFF

You can have the camera focus when
the shutter button is pressed halfway.

You can focus manually.

OFF

Start recording by pressing the motion
picture button.

Elapsed recording time

Available recording time

• The audio is also recorded simultaneously from the

built-in microphone on this unit. (Motion pictures

cannot be recorded without audio.)

• The recording state indicator (red)

will flash while recording motion pictures.

• Press the shutter button halfway when it is difficult to focus on the subject.

• Check the battery status and make sure the power is on when using the stereo

microphone (DMW-MS1; optional) (P182).

Stop the recording by pressing the motion picture button again.

• Sound will be heard when pressing the motion picture button indicating start/stop of

motion picture recording.

Sound volume can be set in [BEEP] (P36).

• If the card becomes full in the middle of recording, the camera stops recording

automatically.

DMC-G2K&G2W&G2EB-VQT2S42_eng.book 114 ページ２０１０年４月１３日　火曜日　午後７時４０分

Summary of Contents for DMC-G2R





















































































































































































































Search results

Summary of Contents for DMC-G2R

Reviews:

Related manuals for DMC-G2R

Brands by name

Popular brands

Panasonic DMC-G2R, Operating Instructions Manual

Search results

Summary of Contents for DMC-G2R

Reviews:

Related manuals for DMC-G2R

Brands by name

Popular brands