Convenient functions
VQT4W79
71
Settings for USB HDD
USB HDD Registration
Register the USB HDD. (
>
62)
USB HDD Disconnection
This function puts the USB HDD in a state in
which it can be safely disconnected. (
>
61)
USB HDD Management
Press and hold [OK] for 3 seconds to show
the following settings.
Delete all titles
Delete all titles on the USB HDD.
• Delete does not work if one or more titles
are protected.
Format USB HDD
Formatting deletes all contents, and
they cannot be restored. Check
carefully before proceeding.
Cancellation of all USB HDD Registrations
This function cancels the registrations of all
the USB HDDs registered on this unit.
Only do this if you are going to dispose of this
unit.
• Before operation, perform “USB HDD Disconnection”
(
>
above) and remove the USB HDD.
• It is not possible to play back the content from a
USB HDD whose registration has been cancelled.
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected. (The
picture is clearer and finer.)
Seamless Play
The segments can be played back seamlessly.
• When “Off” is selected, frame-dropping between
the segments can be avoided, but the video may
freeze for a moment between the segments.
• Seamless Play function does not work
depending on the condition or the kind of
programme.
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” during
AVCHD playback.
DMR-HWT230EB_eng.book 71 ページ ２０１３年４月１１日 木曜日 午後３時９分
