10
RQT9414
STEP
2
Channel reception settings and TV aspect settings
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [
Í
] to turn the unit on.
When connecting to a television that has the VIERA Link or Q
Link functions (
>
40), downloading from the television starts.
You can download the tuning positions from the television for
the channels in this unit’s channel coverage.
If the Auto setup menu appears on the television.
Press [
3
,
4
] to select “Digital & Analogue channels” or
“Digital channels” and press [OK].
≥
Digital & Analogue channels:
Perform the analogue Auto-Setup after performing the
DVB Auto Setup.
≥
Digital channels:
Perform the DVB Auto Setup. (analogue Auto-Setup is not
performed)
DVB Auto Setup starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
≥
When the channel could not be received properly, adjust
the position and direction of the aerial.
3
Press [
3
,
4
] to select “On” or “Off” when
the “Power Save” setting menu appears,
and press [OK].
The features of the power save function when the unit is in
standby mode are as below.
§
1
“FL Display” is set to “Automatic” in the Setup menu.
(
>
66)
§
2
It is possible to startup and start recording within several
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
If the TV aspect setting screen appears on the
television.
Press [
3
,
4
] to select the TV aspect and press [OK].
≥
16:9:
When connected to a 16:9 widescreen television
≥
Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(
>
85).
≥
Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(
>
85).
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system
>
19)
4
Press [
2
,
1
] to select “Yes” and
press [OK].
5
Press the numbered buttons or
[
3
,
4
,
2
,
1
] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about
30 minutes.
6
When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN ].
[For]Germany[and]Austria[
The “Active Antenna” setting menu appears.
Press [
3
,
4
] to select “On” or “Off” and press [OK].
When using indoor antenna that is not equipped with power
supply, select “On”.
[For]France,[Italy,[Spain[and[Switzerland]
If the Country setting menu appears on the television.
Press [
3
,
4
] to select the country and press [OK].
≥
On:
It will go into the Power Save mode when the unit
is in standby condition.
≥
Off:
It is possible to start quickly from the standby
mode. (Quick Start mode)
STATUS
MANUAL SKIP
CREATE
CHAPTER
FU
NC
TIO
N M
EN
U
DI
RE
CT
N
AV
IG
AT
OR
GUIDE
RETURN
PLAY/x1.3
PAUSE
STOP
SLOW/SEARCH
SKIP
ShowView
CH
PAGE
SELECT
INPUT
0
9
8
7
6
5
4
3
2
1
VOL
AV
TV
DRIVE
SELECT
CH
DELETE
PROG/CHECK
EXIT
OK
OPTION
,
,
,
OK
RETURN
FUNCTION MENU
EXIT
Numbered
buttons
DVB Auto
S
etup
S
can
CH 5
69
CH
Quality
Channel Name
Type
TV : 1
Radio : 0
Data : 1
ABC
ABC 2
1
2
TV
Data
9
9
Power
S
ave
On : Minimises standby power
consumption; disables Quick
S
tart function and
AV2 loop-through in standby.
On
Off
Power Save
On
§
1
Off
Power consumption
Approx. 0.9 W Approx. 15 W
Startup time
Not Quick
Quick
§
2
Watching the picture
(e.g. Pay TV) from the
device connected to AV2
Cannot do
Can do
∫
If the clock setting menu appears
Set the clock manually (
>
68).
∫
To confirm that stations have been tuned
correctly (
>
64)
∫
To restart set up (
>
63)
[For]Germany[and]Austria[
On screen messages are displayed in German in the factory
preset. After completing step 6, change the on-screen display
to English in the following steps.
1
Press [FUNCTION MENU].
2
Press [
3
,
4
] to select “Weit. Funktionen” and press [OK].
3
Press [
3
,
4
] to select “Setup” and press [OK].
4
Press [
3
,
4
] to select “Display” and press [
1
].
5
Press [
3
,
4
] to select “Sprachauswahl” and press [OK].
6
Press [
3
,
4
] to select “English” and press [OK].
7
Press [EXIT].
Post Code
Current Country : XXXXXX
This unit downloads GUIDE Plus+ data
several times a day.
Number
OK
CHANGE
0
9
RETURN
DMREX79&89EC-RQT9414-L_eng.book 10 ページ 2009年5月14日 木曜日 午前9時23分