26
VQT3C69
Advanced timer recording
[HDD]
1
Press [PROG/CHECK].
2
Press [
3
,
4
] to select “New Timer
Programme” and press [OK].
3
Press [
2
,
1
] to move through the
items and change the items with
[
3
,
4
].
≥
When “Channel” is selected, you can press the “Blue” button
to change the category [e.g., All Channels, TV, Radio,
Analogue (
[DVB-C]
), Favourite (
>
64)] and then press
[
3
,
4
] to select the channel you want to record.
≥
Press and hold [
3
,
4
] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥
You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥
Date
Titles recorded using the same daily, weekly or series timer
are bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (
>
33) except when using
Auto Renewal Recording.
≥
The recording drive is fixed to HDD.
≥
You can also press [REC MODE] to change the recording
mode.
≥
RENEW (Auto Renewal Recording)
(
>
27)
ON
!)
OFF
≥
Programme Name
Press [
2
,
1
] to select “Programme Name” and press [OK].
(
>
50, Entering text)
≥
STTL (Subtitles)
(Digital broadcast only)
AUTO
!)
OFF
When the “Channel” column is set in AV1 or AV2, this setting is
unavailable.
You can also press [STTL
] to switch “STTL” setting.
When there are multiple languages, select the subtitle
(
>
66, DVB Preferred Language).
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
“
F
” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [
Í
] to turn the unit off.
≥
Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A
Icons
B
Message displayed in the “Drive space” line
C
Channel name, programme name and other
information are displayed.
∫
To change a programme
Press [
3
,
4
] to select the programme and press [OK]. (
>
left,
step 3)
∫
To delete a programme
Press [
3
,
4
] to select the programme and press [DELETE
¢
].
You can also delete a programme with the following steps
1
Press [
3
,
4
] to select the programme and press [OPTION].
2
Press [
3
,
4
] to select “Delete” and press [OK].
∫
To release the unit from recording standby
Press [
3
,
4
] to select the programme and press the “Red”
button.
≥
The timer icon “
F
” disappears from the timer recording list.
≥
You cannot cancel timer recording standby mode as long as even
one timer icon “
F
” remains in the timer recording list.
≥
Press the “Red” button again to activate timer recording standby.
∫
To resolve overlapping
Press [
3
,
4
] to select the programme with
and press [OK].
≥
If the “Overlapped Timer Recording” screen appears (
>
27)
≥
If the on-screen instructions do not appear, change or delete the
overlapped programme.
∫
To exit the timer recording list
Press [PROG/CHECK].
≥
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
Manually programming timer
recordings
[.
l
l
l
l
a.
Date:
Current date up to one month later minus
one day
;:
Daily timer:
SUN-SAT
>
MON-SAT
>
MON-FRI
;:
Weekly timer:
SUN
>
---
>
SAT
Timer
Recording
30:24 SP
HDD
Remain
Mode
Stop
Start
Drive
No.
Date
STTL
Channel
Drive
space
New Timer Programme
TUE 11.10.11. 12:54:00
Timer
Recording
30:24 SP
HDD
Remain
Mode
Stop Drive
Start
Channel
Date
STTL
22:30
22:00
18. 10. TUE
OFF
1 Das E
Programme Name
SP
All Channels : Das Erste
TUE 11.10.11. 12:54:00
HDD
No. Channel
ARD
01
Timer icon
0:24 SP
Mode
Stop Drive
STTL
HDD
Drive
space
SP
OK
22:30
OFF
ogramme
TUE 14.10.09. 12:56:00
Check to make sure “OK” is
displayed (
>
right).
e.g.,
Check, change or delete a programme,
or resolve overlapping
F
Timer recording standby is activated.
[
This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily, weekly or series timer recording (
>
31).
The icon disappears the next time the timer programme starts
recording.
The programme was recording prohibited so it was not
recorded.
X
The programme did not complete recording for some reason.
Timer programmes set to Auto Renewal Recording (
>
27).
HDD
Recording drive is set to HDD
OK:
Displayed if the recording can fit in the remaining
space.
>
(Date):
For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on HDD.
! :
It may not be possible to record because:
≥
there is not enough space left.
≥
the number of possible titles has reached its
maximum.
≥
programmes are overlapped.
≥
programmes are deactivated.
Timer
Recording
30:24 SP
HDD
Remain
RETURN
OK
Press OK to store new programme.
Mode STTL
Stop Drive
Start
No.
Date
Channel
Drive
space
New Timer Programme
TUE 11.10.11. 12:54:00
Note
DMREX84C-VQT3C69_eng.book 26 ページ ２０１０年１２月１０日 金曜日 午後４時４５分
