Recording
VQT4G51
38
Timer recording
1
Press [PROG/CHECK].
2
Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT
].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “
F
” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “
F
” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(
>
36)
3 Press [OK].
To show programme information
Press [STATUS
].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DR
HDD
SUN 01.01.2012 8:05
Delete
Info
New Timer Programme
SAT 07.01
SAT 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
SAT 07.01
SUN 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (
>
36).
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (
>
117)
- programmes are deactivated, etc.
DMR-BCT820_720_721EG_eng.book 38 ページ ２０１２年８月１日 水曜日 午後５時１８分
