With Other Equipment
VQT4G51
71
[HDD]
Recording mode: XP, SP, LP, EP
• Connect the equipment with AV2 input terminal
using a 21-pin Scart cable (
>
17).
• Set “AV2 Input” and “Ext Link” (
>
97).
• Make timer programming on the external
equipment.
1
Press [FUNCTION MENU].
To cancel the External link
1 Turn on this unit.
2 Press [FUNCTION MENU].
3 Select “Ext Link Standby” in “Others”, then
press [OK] to stop recording or to cancel
linked timer recording standby. (“EXT-L”
disappears.)
• It will be recorded in standard definition quality even if the
programme is in high definition.
• During Ext Link Standby mode or recording, you cannot
select external input other than AV2.
• This function does not work when “TV System” is set to
“NTSC” (
>
96).
• This function does not work while recording two
programmes simultaneously with timer recording.
• The beginnings of recordings may not be recorded correctly
in some cases.
• Programmes are recorded as one title on this unit when the
end time of the earlier timer recording and the start time of
the later timer recording are close to each other.
To divide the titles, refer to “Dividing title” (
>
50).
Linked timer recording (SKY Digital
STB, etc.)–EXT LINK
2
Select “Ext Link Standby” in “Others”, then
press [OK].
• “EXT-L” lights on the unit’s display.
DMR-BCT820_720_721EG_eng.book 71 ページ ２０１２年８月１日 水曜日 午後５時１８分
