background image

EN3

English

 

WARNING

 

ƪ

Switch off the Miniature Circuit Breaker (MCB) before any service to avoid electric shock hazards.

 

ƪ

In time of lightning / thunder, switch off the Miniature Circuit Breaker (MCB) in advance to protect the 
appliance against possible damage.

 

ƪ

Inspect the built-in ELB (once a month) to avoid a hazard to users such as damage to property, 
serious injury or death. Please refer to "TEST OPERATION" at page EN11.

 

ƪ

Inspect the Miniature Circuit Breaker (MCB) once a month to ensure no faulty on the household 
earthing system that will lead to electric shock hazard.

 

ƪ

The manufacturer is not liable for damage caused by incorrect installation or failure to follow the 
instruction indicated in the Operating and Installation Instructions.

 

CAUTION

 

ƪ

Never use benzene, thinner, bleaching agent and such for cleaning purpose to avoid smoke 
emission, ignition, fi re and electric shock hazards.

 

ƪ

Avoid using dirty water as it may affect heater performance and other components.

 

ƪ

Do not block the Water Outlet with hand, towel or bend the shower hose (not provided). The water 
fl ow rate will drop and water temperature may become very hot.

 

ƪ

In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not 
be supplied through an external switching device, such as a timer, or connected to a circuit that is 
regularly switched on and off by the utility.

 

ƪ

Do not switch on if there is possibility the water in the appliance is frozen.

 

ƪ

Never fi x the appliance forcibly with tape or adhesives. Strictly follow all the instructions given for 
installation. (See page EN7-EN11 "HOW TO INSTALL ELECTRIC WATER HEATER".)

 

ƪ

Please make sure the O Ring is not removed and shall be free from foreign particle to avoid water 
leaking.

 

ƪ

Press the ON/OFF DP (Double Pole) Switch before and after each usage.

 

ƪ

Always turn on the Cold Water Faucet fi rst and then adjust the Hot Water Faucet to get the desired 
water temperature. So as to avoid the danger of scalding when operating this appliance.

 

ƪ

This product is intended for household use only.

 

ƪ

Please read the instructions before proceeding to maintenance. (See page EN5-EN6 
"MAINTENANCE".)

 

ƪ

The appliance is intended to be permanently connected to the water mains and not connected by a 
hose-set.

 

ƪ

Before installation, make sure the water fl ow pressure is under the allowable rated pressure as stated 
on Specifi cations table. (See page EN6 "SPECIFICATIONS".)

DH-6SM1_PH.indb   3

DH-6SM1_PH.indb   3

1/27/2021   12:55:01 PM

1/27/2021   12:55:01 PM

Summary of Contents for DH-6SM1PW













Reviews: