Panasonic DH-6SM1PW, Operating And Installation Instructions

Page: 5 / 12

EN5
English
Note:
• The water temperature lowers as the volume of water is increased by opening the Faucet and water temperature rises
as the volume of water is decreased by closing the Faucet.
• In case of continuous usage at high temperature setting, water temperature will increase and may cause the control
device to activate temporarily resulting in water temperature to drop.
• If you use water at more than one point, the water pressure will drop and the water fl ow may become weak or the
water temperature may rise. However, this is not a sign of any trouble. Adjust the Hot Water Faucet to a proper level.
• Do not switch on if there is possibility the water in the heater is frozen.
HOW TO USE
Turn on the Main Water Valve.
Switch on the Miniature Circuit Breaker (MCB) and the ON/OFF DP (Double Pole) Switch.
Push the ELB Reset Lever up if it is down.
Min Max
ELB
ELB Test
ELB Reset
Push Up
Min Max
ELB
ELB Test
ELB Reset
Push Up
Min Max
ELB
ELB Test
ELB Reset
Push Up
FILTER
CLEANING FILTER
CLEANING FILTER
CLEANING FILTER
CLEANING
FILTER
CLEANING
FILTER
CLEANING
FILTER
CLEANING
Push
ELB: On condition ELB: Off condition
Set the Temperature Control Knob to the desired position.
(a) When the Temperature Control Knob is set to "Min", temperature level
is low.
(b) When the Temperature Control Knob is set to "Max", temperature level
is high.
Turn on the Hot Water Faucet. The ELB Lamp will light up once the
appliance operates.
Min Max
ELB
CAUTION
Avoid using dirty water as it may affect heater
performance and other components.
Always turn on the Cold Water Faucet fi rst and then
adjust the Hot Water Faucet to get the desired water
temperature. So as to avoid the danger of scalding when
operating this appliance.
MAINTENANCE
WARNING Switch off the Miniature Circuit Breaker (MCB) before any
service to avoid electric shock hazards.
1. Inspection on the built-in ELB.
Inspect the built-in ELB (once a month) to avoid a hazard to users such as damage to property, serious injury or
death.
• Make sure the appliance is in on condition.
• Press the ELB Test Button. If the ELB is in normal condition, ELB Reset Lever will slide down.
• Push up the ELB Reset Lever to reset the ELB.
HOW TO USE ELECTRIC WATER HEATER
DH-6SM1_PH.indb 5 DH-6SM1_PH.indb 5 1/27/2021 12:55:02 PM 1/27/2021 12:55:02 PM