43
Recording
(ENG) DVQX1376
Controlling Focus After Recording
(Post Focus/Focus Stacking)
Applicable modes:
The camera can perform Burst recording in the same picture quality as 4K photo recording
while automatically shifting the focus to different areas.
After the recording, you can select the desired focus point for the picture to be saved.
This function is suited for recording still objects.
• We recommend that you use a tripod when recording images to be used for Focus Stacking.
• Use a UHS Speed Class 3 card.
1
Set the drive mode dial to [
].
2
Decide on the composition, and press the shutter
button halfway.
• Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the
focus display (
A
) will flash. Recording is not possible in this case.
3
Press the shutter button fully to start recording.
• The focus point changes automatically while recording.
When the icon (
B
) disappears, recording automatically
ends.
• A motion picture will be recorded with [Rec Format] set to [MP4]. (Audio will not be
recorded.)
• A motion picture will be recorded at a frame rate of [60p]. It can be played back on the
camera regardless of the [System Frequency] setting.
• When [Auto Review] is enabled, a screen that lets you select the desired focus area will
be displayed. (P44)
From the time you press the shutter button halfway until the end of recording:
• Maintain the same distance to the subject and the same composition.
• Do not operate the zoom.
4K
4:3
DC-GH5SGN-DVQX1376_eng.book 43 ページ ２０１７年１２月４日 月曜日 午前９時４４分
