Preparation/Basic “Quick Start Guide”
14
DVQX1376 (ENG)
• Check that the access lamp has gone off.
• Push it securely all the way until you hear a click while being careful about the direction in
which you insert it.
To remove the card, push the card until it clicks, then pull the card out upright.
• To insert/remove the card into/from the card slot 1
A
, push the top side of the card. To insert/
remove the card into/from the card slot 2
B
, push the bottom side of the card.
∫
Card access indicators
• During access (i.e., while the access lamp is lit up or [
]/[
] is displayed), do not turn
this unit off, remove the battery, card or disconnect the AC adaptor (optional).
• Change lenses where there is not a lot of dirt or dust.
• Do not press the lens release button
A
when you attach a lens.
4
Inserting the Card (Optional)
Access lamp
Lights up while the card is
being accessed.
Access indication
Lights up red while an
image is being recorded to
the card.
5
Attaching/Removing the Lens
DC-GH5SGN-DVQX1376_eng.book 14 ページ ２０１７年１２月４日 月曜日 午前９時４４分
