
Wi-Fi/Bluetooth
102
DVQX1376 (ENG)
Preparations:
The following conditions are required to use Auto Cloud Backup:
• Set the camera to a state in which it can be turned on with the smartphone (standby state).
(P96)
– Camera: [Bluetooth] and [Remote Wakeup] are set to [ON].
– Camera: The Camera On/Off switch is set to [OFF].
• Camera: The card’s Write-Protect switch is not set to [LOCK].
Start up the “Image App” in foreground (a state in which the app can be operated),
and run a backup.
• A backup will start if the smartphone is connected to the wireless access point set up in (Setup
3
).
• It may be possible to run a backup even if the app is running in background (a state in which it
cannot be operated).
• The first job backs up all images on the card. The second and subsequent jobs back up only
those that have not been backed up yet.
• If you change the backup destination, images that have already been backed up are not saved
to a new destination.
• A backup job will stop in the following cases:
– When you set the camera on/off switch to [ON]
– When you remove or insert the card
– When the battery runs out of power (The job will resume after the battery is recharged)
• You cannot back up the following types of images:
– Motion pictures
– 4K burst files
– Images recorded with the Post Focus function
The smartphone sends its location information to the camera via Bluetooth, and the
camera performs recording while writing the acquired location information.
Preparations:
Enable the GPS function on the smartphone.
1
Make a Bluetooth connection to the smartphone. (P91)
2
Select the camera’s menu.
• The camera will enter a mode where location information can be recorded and [
] will
be displayed on the recording screen.
3
Take pictures on the camera.
• Location information will be written to the recorded pictures.
Running a backup
Recording location information to the camera’s images
Wireless connectivity required:
>
[Setup]
>
[Bluetooth]
>
[Location Logging]
>
[ON]
Bluetooth
MENU
DC-GH5SGN-DVQX1376_eng.book 102 ページ 2017年12月4日 月曜日 午前9時44分