Panasonic DC-S1R, Operating Instructions Manual

Page: 190 / 565

8. Metering/Exposure/ISO Sensitivity
190
0 In [M] mode, you can compensate the exposure by setting the ISO sensitivity
to [AUTO].
0
When [Auto Exposure Comp.] is set to [ON], the flash output will automatically
be set to the level appropriate to the exposure compensation.
0
When the exposure compensation value falls below or exceeds
n
3 EV, the
brightness of the recording screen will no longer change.
Press the shutter button halfway or use AE Lock to reflect the value on the
recording screen.
0 When the exposure compensation value falls below or exceeds the n 3 EV
range, exposure compensation values on the status LCD are indicated with
[ ]/[ ]. (
l 30 )
0 The set exposure compensation value is stored even if you turn off the
camera. (When [Exposure Comp. Reset] is set to [OFF])
0 The standard value for correct exposure can be adjusted:
[
] ¨ [ ] ¨ [Exposure Offset Adjust.] ( l 328 )
0
You can set the exposure compensation value to be reset when the camera is
turned off:
[
] ¨ [ ] ¨ [Exposure Comp. Reset] ( l 328 )
0
You can change the operation of the [ ] button:
[ ]
¨
[ ]
¨
[WB/ISO/Expo. Button] ( l 335 )
0 Exposure Bracket can be set and flash output can be adjusted on the
exposure compensation screen:
[
] ¨ [ ] ¨ [Exposure Comp. Disp. Setting] (
l
335 )