8
2nd Cassette Module
Setup Procedure For Option
ATTENTION
■
■
■
■
■
Unplug the power code when installing the 2nd cassette module
C
Unplug the power code when installing each unit.
1
Remove the tapes. (3 pieces)
2
Remove the tape as the arrow
shows.
Make sure that the roller is on the
right position as shown left.
(The jagged side is up.)
If the position is wrong, adjust the
rollers the right position.
3
Press the button of the white rear
cover then remove the cover.
4
Place the machine on the 2nd
cassette module.
Right Position
Wrong Position
