ENGLISH –
9
Getting Started
Disconnect the power cord plug from the wall outlet as a safety
precaution before carrying out any cleaning.
• Electric shocks can result if this is not done.
If the lamp has broken, ventilate the room immediately. Do not touch
or bring your face close to the broken pieces.
• Failure to observe this may cause the user to absorb the gas which was released when the lamp broke
and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces
may cause injury.
• If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek
medical advice immediately.
• Ask your dealer to replace the lamp unit and check the inside of the projector.
Ask an Authorized Service Center to clean inside the projector at least
once a year.
• If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems
with operation.
• It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask
your nearest Authorized Service Center to clean the projector when required. Please discuss with the
Authorized Service Center regarding cleaning costs.
Do not reach for the openings beside the optical lens, during
horizontal or vertical movements of the lens there is a injury hazard.
An effort to keep our environment clean, please bring the non
repairable unit your Dealer or a Recycling Company.
Do not use projectors with the adjustable feet or projection lens cover
removed.
• If this is not observed, the sets may not operate correctly or accidents may result.
■
■
■
■
■
■
