background image

3

(EN)

Read before installation

 

Read the Installation Instructions 
carefully to install the remote controller 
correctly and safely.
Be sure to read the Safety Precautions 
in particular before installation.

 

After the installation is complete, 
perform test operation to con

fi

 rm that 

no abnormality is present.

 

We assume no responsibility for 
accidents or damages resulting from 
methods other than those described in 
the installation instructions or methods 
without using speci

fi

 ed parts.

Malfunctions that occurred due to the 
unauthorised installation methods are 
not covered by the product warranty.

 

Read the installation instructions 
supplied with indoor units as well.

 WARNING

This symbol refers to a hazard or unsafe 
practice which can result in severe 
personal injury or death.

 CAUTION

This symbol refers to a hazard or unsafe 
practice which can result in personal 
injury or product or property damage.

 WARNING

• Turn  o

  the circuit breaker 

of the units before 

installation.

• Ask your dealer or 

professionals for installation 

and electric work.

• This controller shall be 

installed in accordance with 

National Wiring Regulations.

• Connect and 

fi

 x the speci

fi

 ed 

cables for wiring securely.

• Do not allow the connection 

to be exposed to the 

external force of the cables.

• Choose an installation location 

that su

  ciently supports the 

weight of the remote controller.

 CAUTION

 

Do not use the remote 

controller at the following 

locations.

• Location  where 

condensation occurs

• Location  where 

fl

 ammable 

gases, etc. may leak

• Location where corrosive 

gases, etc. may leak

• Location with lots of water or oil 

droplets (including machine oil)

• Location where voltage 

fl

 uctuation frequently occurs

• Location where there 

is a machine producing 

electromagnetic radiation

• Location where droplets of 

organic solvents spread

• Location where acidic or 

alkaline solutions or special 

sprays are frequently used

 

Do not operate with wet hands.

 

Do not wash with water.

The English text is the original instructions. Other languages are translation of 
the original instructions.

NOTICE

Safety Precautions

Summary of Contents for CZ-RTC5B
















Reviews: