manualshive.com logo in svg

Panasonic CZ-RTC4A, Operating Instructions Manual

Share
Download
Panasonic CZ-RTC4A Operating Instructions Manual Download Page 24

24

The remote
controller screen
displays a 

fl

 ashing

“ 

 ”.

●

  Faulty sensor or incorrect installation. 

Turn OFF the ECONAVI function with the 
remote controller and contact the retailer or 
point of purchase with the Model No. and 
problem.

The remote
controller screen
does not display the

 or 

.

●

  The indoor unit has stopped. Turn on the 

indoor unit.

●

  The unit is in Fan mode. The ECONAVI 

function does not operate in Fan mode.

●

  The nanoe™X/ECONAVI function is set 

to OFF. Turn the nanoe™X/ECONAVI 
function ON with the remote controller.

●

  The indoor unit may not support the 

ECONAVI function. If you turn the 

ECONAVI function ON with the remote 

control but there is no change, the indoor 

unit does not support the ECONAVI 

function.

The indoor unit may not support the 

nanoe™X function. If you turn the 

nanoe™X function ON with the remote 
control, 

 will appear instead.

Please contact the dealer.

•  If you need to contact for servicing, check the back cover of the operating instructions for indoor 

units or outdoor units.

Troubleshooting

Summary of Contents for CZ-RTC4A





























Reviews:

No comments

Brands by name

Popular brands

Load more brands