manualshive.com logo in svg

Panasonic CZ-RTC4A, Operating Instructions Manual

Share
Download
Panasonic CZ-RTC4A Operating Instructions Manual Download Page 11

11

4

Set the program pattern. (Program step 3)

There are 4 program patterns.
Pressing [

▼

/

▲

] repeats the following display patterns.

Pattern 1 (Default display)

>ź@

Pattern 2

>Ÿ@

The indoor unit starts operation at the
programmed time.

The indoor unit stops operation at the
programmed time.

°

°

>ź@

>Ÿ@

Pattern 4

>Ÿ@

>Ÿ@

Pattern 3

>ź@

>ź@

The indoor unit starts operation at the
programmed time and changes the
temperature settings.

The indoor unit changes the
temperature setting at the
programmed time.

For Pattern 3 and Pattern 4:

 Press [ / ] to change the temperature setting.

5

Select the program pattern and press [SET].

The program timer setting is con

fi

 rmed and the unit enters the con

fi

 rmation mode

. 

Note

●

 If you press [CANCEL] during the setting, it returns to the program con

fi

 rmation 

mode.

●

 If there is no operation made for 10 minutes during the setting, it returns to the 

normal mode.

  In this case, all the settings in progress will be invalid.

Weekly Program Function

Summary of Contents for CZ-RTC4A





























Reviews:

No comments

Brands by name

Popular brands

Load more brands