manualshive.com logo in svg

Panasonic CZ-RTC4A, Operating Instructions Manual

Share
Download
Panasonic CZ-RTC4A Operating Instructions Manual Download Page 23

23

If operation does not start by pressing [Start/Stop] button ...

Check the following before asking for repair.

Blackout?

●

  After recovery from blackout, press 

[Start/Stop] again.

 If operation does not start, turn off the circuit 

breaker and consult the dealer of purchase 
about the symptom and Model No.

Is the circuit breaker
turned off?

●

  Turn it on and press [Start/Stop] again.

 If operation does not start, turn off the circuit 

breaker and consult the dealer of purchase 
about the symptom and Model No.

Is 

 blinking?

●

  After blinking stops, press [Start/Stop] 

again.

 If operation does not start, turn off the circuit 

breaker and consult the dealer of purchase 
about the symptom and Model No.

Is   displayed?

●

  If any of the following alarm indications 

appears, stop operation once and restart 
approx. 1 minute later. 
(Alarm indication, off)
[•E04  •E06  •P10  •P20  •H06]

 If the indication does not reappear, use the unit.
 If the indication reappears or an alarm indication 

other than the above (combination of numbers 
and characters such as E, F, H, L and P) 
appears, stop operation, turn off the circuit 
breaker and consult the dealer of purchase 
about alarm indication, Model No. and indoor 
unit No.

Cannot stop the

operation.

Or the unit starts to

run automatically

even if [Start/Stop]

(Off) is pressed.

●

  Check if the outing function is activated or 

not. (

)

●

  Check control by central control device.

Troubleshooting

Summary of Contents for CZ-RTC4A





























Reviews:

No comments

Brands by name

Popular brands

Load more brands