10
(EN)
Mounting
When mounting the bottom case
(step
2
)
Tighten the screws securely until they reach the bottom case.
(Otherwise, loose screw heads may hit the PCB and cause malfunction when
mounting the top case.)
Do not over-tighten the screws.
(The bottom case may be deformed, resulting in fall of the unit.)
Embed the included switch box into the wall beforehand.
1
Remove the screws for
fi
xing the
control panel, and remove the
control panel.
3
Connect the connector, and attach
the control panel.
Remove the control panel.
Control panel
Connector
Remove the connector.
Connect the connector.
2
Mount to the switch box.
Insert the controller to the switch
box (supplied) that has been
embedded in the wall.
Mount the bottom case. (with the
power supply part attached) of the
controller to the switch box (with
small screws (supplied))
• Do not allow the connection to be
exposed to the external force of wiring.
Switch Box
(supplied)
Bottom case
(with the power
supply part
attached)
ON/OFF
Controller
Wall
Switch Box
119
mm
0 - 5 mm
Cross-section view (Embedded state)
Connector
Attach it from above.
Do not allow the
wires to come in
contact with parts
on the PCB.
(Caught wires may
destroy the PCB.)
Attach the screw
for
fi
xing the
control panel.
Screw for
fi
xing the control panel
業務用リモコン̲CZ-ANC3据付書̲En.indd 10
業務用リモコン̲CZ-ANC3据付書̲En.indd 10
2017/05/17 14:36:54
2017/05/17 14:36:54