47
(EN)
Next
fi
lter cleaning time
To check the cleaning timing
3
Select the target.
(See P.29 step 3.)
◄
►
(or
)
→
▲
▼
→
• Press
◄
►
to select [All] or [Zone], and
press
▲
▼
to select [Group].
4
Con
fi
rm the operation time to the
next cleaning.
(Press 2 times to
fi
nish.)
When cleaning is immediately
necessary
The screen shown on the right is
displayed.
• Press
◄
►
to select [YES], and press
.
(Press 2 times to
fi
nish.)
Note
Depending on the model, [Filter info]
cannot be used. In this case, a message
is displayed as shown on the right.
When the
fi
lter cleaning time comes, the
icon is displayed on the standby screen.
Clean the
fi
lter if this icon appears.
*To display each item, see steps 1 to 2 on the previous page.
