Panasonic CZ-06KPU11P Installation Manual Download Page 2

DEUTSCH

FRANÇAIS

ESP

AÑOL

CHINESE

1

ENGLISH

BEFORE INSTALLATION

PRECAUTIONS

Refer also to the installation manual attached to the indoor unit.

ACCESSORIES

Installation manual.

NOTE TO INSTALLER

Be sure to instruct the customer how to properly operate the system showing him/her the attached operation manual.

PREPARATION OF DECORATION PANEL

〈〈

 For this unit, you are able to select air flow directions. To discharge air in 2 or 3 directions, it is necessary to purchase optional

blocking pad kit. 

〉〉

HANDLING OF DECORATION PANELS

Never place the panel facing down nor lean it against a wall nor leave it on a projecting object.

Never touch or put pressure on the swing flap.

(The swing flap may malfunction)

(1) Remove the suction grille from the decoration panel.

1

Push the suction grille lever inward and lift up the lever side.

(Refer to Fig. 1)

(2) Remove the service cover on the corner.

Slide the service cover outward to remove. (Refer to Fig. 3)

2

Detach the suction grille from the decoration panel by lifting the grille

up approximately 45 degrees. (Refer to Fig. 2)

Lever

Fig. 1

45°

Fig. 2

Fig. 3

BYC125-W1(8)-(E)

01.9.13, 8:56 AM

1

Summary of Contents for CZ-06KPU11P






Reviews: