AUTO
AUTO
8.8
About Cursor Key Which Points To “OFF” On Remote Control
AUTO
PRESS "OFF/ON" BUTTON
FAN
SPEED
AUTO
1.
2.
When the ON/OFF button on the remote control is pressed, the cursor key which points to “OFF” will appear or
disappear to indicate the ON/OFF status of the air conditioner.
The air conditioner is running but the cursor key which points to “OFF” appears. The air conditioner can be
stopped with any button (Except for “ON/OFF”, “TIMER SET”, “TIMER ON”) pressed.
The air conditioner is on standby, but the cursor key which points to “OFF” disappears. The air conditioner can
be started with any button(Except for “ON/OFF”, “TIMER SET”, “TIMER OFF”) pressed.
For some reason (Ex. The signal of the remote control does not reach the signal receiver of the indoor unit.), the
display of the remote control will not correspond with the actual ON/OFF status of the indoor unit:
27
8.9.
Indoor Fan Motor Control
Automatic fan speed control
When automatic fan speed set, the available range for fan speed is from Hi to Slo.
Basic Fan Speed
Cooling Mode
Operation
Soft Dry
Operation
Manual
Auto
Category
Hi
Me
Lo
Lo-
Manual
Auto
Manual Fan Speed Control
Basic fan speed can be manually adjusted (Lo, Med, Hi) by using the fan speed selection button.
Manual
Auto
SLo
SSLo
Heating Mode
Operation
8.10.
Auto restart control
If the operation is stopped due to a power failure u
, it will restart automatically
un der the previous operation mode when the power supply is resumed.
nder any operation mode
CS-PW9DKE / CU-PW9DKE / CS-PW12DKE / CU-PW12DKE
AUTO
HEAT
COOL
DRY
OFF
AUTO
HEAT
COOL
DRY
OFF
AIR
SWING
FAN
SPEED
AIR
SWING