Panasonic CS-XU10XKH, Operating Instructions Manual, Page: 16 / 48

16
Cleaning the Air Conditioner
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve “H 99”
error code. Consult an authorised dealer.
• Before cleaning, switch off the power supply and
unplug the unit.
• Do not touch the aluminium fi n as the sharp parts
may cause injury.
• Do not use benzine, thinner or scouring powder.
• Use soap ( pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
(
Structure of the unit may vary depending on
the model)
Indoor unit
Wipe the unit gently with a soft and
dry cloth.
The coils and fans should be
cleaned periodically by an
authorised dealer.
Outdoor unit
Clean the debris that surround the
unit.
Clear any blockage from the drain
pipe.
Front panel
Wash gently and dry.
How to remove front panel
AUTO
OFF/ON
2 Slide the
front panel to
right
A
and
pull out
B
.
1
Raise up.
B
A
Close it securely
AUTO
OFF/ON
2 Match and
push in.
1
Hold horizontally.
3 Close down.
4 Press both ends and center of the front panel.
nanoe
TM
-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently with
water to avoid damaging the
surface.
• Dry the fi lters thoroughly under a shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Remove from the unit Insert into the unit
AUTO
OFF/ON
Aluminium fi n
Front panel
Air fi lters nanoe TM -G Generator