Panasonic CS-S9TKZW, Operating Instructions Manual

Page: 7 / 24

7
English
See "To learn more..." for details.
How to use
To purify the air
nanoe-G
• nanoe-G starts automatically when the unit is
turned on with
OFF/ON
.
• Can be activated even when the unit is turned
off. In this condition, the unit will operate as a fan
with AUTO fan speed and
fl ap swing.
To deactivate viruses/bacteria on the fi lter
nanoe-G
POWER
• After the unit is turned off, the nanoe-G in- fi lter
deactivation may activate up to 150 minutes.
Turning on the unit cancels this operation.
FAN SPEED
To select fan speed
(Remote control display)
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
AIR SWING
To adjust air fl ow direction
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the
fl ap
swings left/right and up/down automatically.
• Do not adjust the fl ap by hand.
Note
, ,
SLEEP
,
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
,
• Cannot be selected at the same time.
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and air
fl ow
direction.
• This control is not applicable when TIMER is set.
To set the timer
2 sets of ON and OFF timers are available
to turn ON or OFF the unit at different preset
times.
TIMER
ON SET
CANCEL OFF CANCEL
1 2 3
1
Select ON or OFF
timer Example:
OFF at 22:00
• Each time pressed:
OFF
Cancel
2
Set the time
3
Con fi rm
SET
TIMER
• To cancel ON or OFF timer, press
ON
or
OFF
to select respective or then press
CANCEL
.
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
ON
or
OFF
to select respective
or then press
SET
.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to 15 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.