background image

16

AUTO

OFF/ON

Cleaning instructions

To ensure optimal performance of the unit, 
cleaning has to be carried out at regular 
intervals. Dirty unit may cause malfunction 
and you may retrieve error code “H 99”.  
Please consult authorised dealer.

• Switch off the power supply and unplug before 

cleaning.

• Do not touch the aluminium fi n, sharp parts may 

cause injury.

• Do not use benzine, thinner or scouring powder.
• Use only soap (  pH 7) or neutral household 

detergent.

• Do not use water hotter than 40 °C / 104 °F.

Indoor unit

Air fi lters

Once every 2 weeks

• Wash/rinse  the  fi lters gently 

with water to avoid damage to 
the fi lter surface.

• Dry  the  fi lters thoroughly under shade, away 

from fi re or direct sunlight.

• Replace any damaged fi lters.

Remove air fi lter

Attach air fi lter

Insert into the unit

Anti-bacterial fi lter

Anti-bacterial fi lter.

• Clean  the  fi lter whenever necessary.
• Wash/rinse  the  fi lter gently with water to avoid 

damage to the fi lter.

• Dry  the  fi lter thoroughly under the shade, away 

from fi re or direct sunlight.

• Replace  the  fi lter every 10 years or replace any 

damaged fi lter. Part no.: CZ-SA22P

Aluminium fi n

Front panel

Air fi lters

Indoor unit

Wipe the unit gently with a soft, 
dry cloth.
Coils and fans should be cleaned 
periodically by authorised dealer.

Outdoor unit

Clear debris that surround the unit. 
Clear any blockage from drain 
pipe.

Front panel

Wash gently and dry.

How to remove front panel

Raise over 
horizontal 
level

1

Pull upward

2

Horizontal

Close it securely

AUTO

OFF/ON

2

  

Match and push in

1

 

 

Hold 
horizontally

3

 

Close down

4  Press both ends and center of the front panel

Anti-bacterial fi lter

ACXF55-28780_SS0720-0.indd   16

25/6/2020   11:10:09 AM

Summary of Contents for CS-RZ25WKRW





















Reviews: