Panasonic CS-RZ12RKR, Operating Instructions Manual

Page: 6 / 12

6
How to use
i AUTO-X To reach temperature quickly
(Cooling only)
i AUTO-X
• The unit controls set temperature according to room
temperature to accelerate room cooling.
Set
temperature
i AUTO-X
-1°C
Max = 4 hours
• After max 4 hours, the set temperature follows the
last set temperature setting.
• Fan speed is fi xed at AUTO, fan speed selection is
prohibited.
• During unit is off, press
i AUTO-X
will turn on the unit
with i AUTO-X mode.
• i AUTO-X mode can be cancelled by pressing the
respective button again.
MODE
To select operation mode
AUTO -
For your convenience
HEAT -
To enjoy warm air
COOL -
To enjoy cool air
DRY -
To dehumidify the environment
FAN -
To circulate air in the room
i AUTO-X -
To reach temperature quickly (Cooling only)
POWERFUL
To reach temperature quickly
POWERFUL
• This operation stops automatically after 20 minutes.
QUIET
To enjoy quiet operation
QUIET
• This operation reduces air fl ow noise.
CLOCK
MODE
AIR CONDITIONER
OFF/ON
SET CHECK RESET
AC RC
ON
OFF
SET
CANCEL
1 2 3
TIMER
QUIET
MODE
TEMP
FAN SPEED
AIR SWING
ECONOMY
POWERFUL
i AUTO-X
AUTO
CLOCK
OFF/ON
CHECK
ON
OFF
SET
CANCEL
1 2 3
TIMER
TEMP
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Remote control
display
POWERFUL
ECONOMY
i AUTO-X
To adjust horizontal airfl ow
direction
• Manually adjustable.
Auto OFF/ON button
Use when remote control is misplaced or a
malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button
until 1 beep is heard, then release.
• To use in HEAT mode, press and hold the button
until 1 beep is heard, then release. And press
again until 2 beeps are heard, then release.
• Press the button again to turn off.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If i AUTO-X mode is set, fan speed is fi xed to AUTO.
To adjust fan speed, cancel i AUTO-X mode.
Remote control
receiver
Indicator
POWER
TIMER
i AUTO-X
ECONOMY
POWERFUL
QUIET
(Green)
(Orange)
(Orange)
(Orange)
(Orange)
(Orange)
F570019-SA0515-0_EN.indd 6 F570019-SA0515-0_EN.indd 6 28/07/2015 10:30:40 AM 28/07/2015 10:30:40 AM
Process Black Process Black