8
Remote control receiver
and indicator
POWER
(Green)
TIMER
(Orange)
To switch between
powerful & quiet
QUIET
POWERFUL
NORMAL
POWERFUL: To reach temperature quickly
• This operation stops automatically after 20
minutes.
QUIET: To enjoy quiet operation
• This operation reduces air
fl
ow noise.
MODE
To select operation mode
AUTO mode - For your convenience
• During operation mode selection the power
indicator blinks.
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power
indicator blinks during this operation.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
SLEEP
To maximise comfort while
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with single
timer or twin timer. Sleep operation has the
priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches
0.0h.
How to use
ON
OFF
SET
TIMER
CANCEL
AIR SWING
TEMP
MODE
SLEEP
FAN SPEED
OFF/ON
OFF/ON
ON
OFF
SET
TIMER
CANCEL
TEMP
OFF/ON
Remote control
display
Press to restore the
remote control to
default setting.
Press and hold
for approximately
10 seconds to show
temperature setting in
°C or °F.
Not used in normal
operations.
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode,
press and hold the button
until 1 beep is heard, then
release.
• To use in HEAT mode,
press and hold the button
until 1 beep is heard, then
release. And press again
until 2 beeps, then release.
• Press the button again to
turn off.
Summary of Contents for CS-PZ9SKE
Page 54: ...54 R32 8 A A A...
Page 55: ...55 ELCB RCD ELCB...
Page 56: ...56 R32 R22 R22 R32 R32 R410A R32 R410A R32 R410A R22 R32 R410A 12 7 1 2 R22 R32 R410A...
Page 57: ...57 Ni Cd...