Panasonic CS-MA95KE Service Manual Download

Page: 54 / 98

•

Water or foreign material gets
into the remote control by
mistake.

The air conditioner does not operate.
•

Has a circuit breaker been tripped?

•

Has the power plug been removed
from the wall outlet?

•

Is the timer being used correctly?

Air conditioner operation noise too loud.
•

Is the installation work slanted?

•

Is the front grille closed properly?

•

Power supply cord and plug
become unusually warm.

•

Switches or buttons do not
operate properly.

•

The circuit breaker switches off
frequently.

•

Abnormal noise is heard during
operation.

•

Water leaks from the indoor
unit.

●

Abnormal Operation

●

Call the Dealer Immediately

The air conditioner does not cool (warm) effectively.
•

Has the temperature been set incorrectly?

•

Are the filters dirty?

•

Are the intake or outlet vents of the outdoor unit obstructed?

•

Are all windows and doors closed?

POWER

ECONOMY

POWERFUL

SLEEP

TIMER

Hmmm!

If the following conditions occur, immediately turn off the main power supply and unplug.

CS-MA95KE CU-MA185KE / CS-MA125KE CU-MA245KE / CS-MA75KE / CS-MA125KE CU-MA195KE

Summary of Contents for CS-MA95KE



































































































Search results

Summary of Contents for CS-MA95KE

Reviews:

Related manuals for CS-MA95KE

Brands by name

Popular brands

Panasonic CS-MA95KE, Service Manual

Search results

Summary of Contents for CS-MA95KE

Reviews:

Related manuals for CS-MA95KE

Brands by name

Popular brands