Panasonic CS-LU18ZKA, Operating Instructions Manual

Page: 15 / 22

33
Cleaning the Air Conditioner
To
Learn More... / Cleaning the
Air Conditioner
Aluminium fi n Front panel
Air fi lters nanoe TM -G Generator
Cleaning has to be carried out at regular
intervals to ensure the unit is at optimal
performance. A dirty unit may cause
malfunction and you may retrieve “H 99”
error code. Consult an authorised dealer.
• Before cleaning, switch off the power
supply and unplug the unit.
• Do not touch the aluminium fi n as the sharp
parts may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use soap ( pH 7) or neutral household
detergent only.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Outdoor unit
Clean the debris that surround
the unit.
Clear any blockage from the
drain pipe.
nanoe
TM
-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damaging
the surface.
• Dry the fi lters thoroughly under a shade,
away from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter Attach air fi lter
Remove from the unit Insert into the unit
Indoor unit
Do handle the unit surface
with care to avoid scratches
by sharp or rough items (e.g.
fi ngernails, tools, rings, etc).
Wipe the unit gently with a soft
damp cloth.
The coils and fans should be cleaned
periodically by an authorised dealer.
Front panel
Wash gently and dry.
How to remove front panel
2
Slide the front
panel to right
A
and pull
out
B
.
1
Raise up.
B
A
Close it securely
2
Match and
push in.
1
Hold horizontally.
3
Close down.
4
Press both ends and center of the front
panel.
English