32
Operation mode
AUTO :
The POWER indicator blinks at the initial stage.
The unit will select an operation mode depending on the room temperature.
COOL :
Provides ef
fi
cient comfort cooling to suit your needs.
DRY :
Operates at low fan speed for a gentle cooling operation.
Energy saving temperature setting
You may save energy when operating the unit within the recommended temperature range.
COOL :
26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.
Air
fl
ow direction
In COOL/DRY mode:
The horizontal
fl
ap is
fi
xed at middle position setting.
Once the temperature is achieved, the horizontal
fl
ap swings up/down automatically.
In COOL/DRY mode:
The horizontal
fl
ap swings up/down automatically.
Auto restart control
When power is resumed after a power failure, the operation will restart automatically with the
last operation mode and air
fl
ow direction.
• This control is not applicable when TIMER is set.
nanoe™X Inside Cleaning
Depending on the unit’s accumulated operation time, the nanoe™X may be activated only
once a day after the unit is turned off standby mode. During the nanoe™X Inside Cleaning
operation, the flap will open slightly with low fan speed operation for 2.5 hours if the unit was
in COOL/DRY mode, and 2 hours if the unit was in nanoe™ TECHNOLOGY, before the unit
is turned off. This is to remove viruses/bacteria from the surroundings.
The Inside Cleaning operation is complete when the fan stops and the
fl
ap closes. Do not
turn off the power supply during this operation. After a power failure, this operation will not
resume.
Operating conditions
Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F)
Indoor
Outdoor
DBT
WBT
DBT
WBT
COOL
Max.
32 (89.6)
23 (73.4)
46 (114.8)
26 (78.8)
Min.
16 (60.8)
11 (51.8)
16 (60.8)
11 (51.8)
DBT: Dry bulb temperature, WBT: Wet bulb temperature
To Learn More...
Summary of Contents for CS-LU18ZKA
Page 20: ...Memo...
Page 21: ...Memo...
