38
12.4. Powerful Mode Operation
When the powerful mode is selected, the internal setting temperature will shift higher up to 3.5
C (for Heating) or lower up to 2
C
(for Cooling/Soft Dry) than remote control setting temperature for 20 minutes to achieve the setting temperature quickly.
12.5. Timer Control
• There are 2 sets of ON and OFF timer available to turn the unit ON or OFF at different preset time.
• If more than one timer had been set, the upcoming timer will be displayed and will activate in sequence.
12.5.1. ON Timer Control
ON Timer 1 and ON Timer 2 can be set using remote control, the unit with timer set will start operate earlier than the setting time.
This is to provide a comfortable environment when reaching the set ON time.
60 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds to determine the
indoor intake air temperature and outdoor air temperature in order to judge the operation starting time.
From the above judgment, the decided operation will start operate earlier than the set time as shown below.
12.5.2. OFF Timer Control
OFF Timer 1 and OFF Timer 2 can be set using remote control, the unit with timer set will stop operate at set time.
12.6. Auto Restart Control
1. When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within three to four
minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be selected randomly) after
power supply resumes.
2. This type of control is not applicable during ON/OFF Timer setting.
12.7. Indication Panel
Note:
• If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operation mode judgment, or
ON timer sampling.
• If Timer LED is blinking, there is an abnormality operation occurs.
• If e-ion LED is blinking, there is an abnormality of e-ion occurs.
• If PATROL LED is blinking, there is a gas sensor error detection.
LED
POWER
TIMER
POWERFUL/QUIET
e-ion
ECONAVI
AUTO COMFORT PATROL SENSOR
Color
Green
Orange
Orange
Blue
Green
Green
Blue
Light ON Operation ON Timer Setting ON
POWERFUL/QUIET Mode
ON
e-ion ON
ECONAVI ON
AUTO COMFORT
ON
PATROL ON
Light OFF Operation OFF Timer Setting OFF
POWERFUL/QUIET Mode
OFF
e-ion OFF
ECONAVI OFF
AUTO COMFORT
OFF
PATROL OFF
Summary of Contents for CS-E24MKES
