background image

6

AUTO 

HEAT 

FAN 
SPEED

AIR

SWING

COOL 

DRY 

TEMP 

AIR SWING

FAN SPEED 

QUIET 

POWERFUL 

TIMER

ON

1

2

3

OFF

SET

CANCEL

MODE

OFF/ON

AC

RC

SET 

CLOCK

CHECK

RESET 

FAN SPEED, AIR SWING

Adjust the 
air

fl

 ow 

direction 
louver.

 

Operations Details

•  There are 5 fan speeds, as well as 

automatic*.

*  For automatic fan speed, the 

speed of the indoor fan is 
automatically adjusted according 
to the operation.

FAN SPEED

Select fan 
speed.

FAN SPEED

AIR SWING

Troubleshooting

  The room has a peculiar odour. 

  This may be a damp smell emitted by the wall, carpet, furniture or 

clothing.

  Indoor fan stops occasionally during automatic fan 

speed setting.

  This helps to remove the surrounding odours.

  Indoor fan stops occasionally during heating 

operation.

  To avoid unintended cooling effect.

•  If automatic vertical air

fl

 ow direction 

has been set, the louvers swing up 
and down automatically.

•  For HEATING operation, the air 

blows horizontally for a while, then 
starts to blow downwards.

•  Keeps the room ventilated.
•  There are 5 options for vertical/

horizontal air

fl

 ow direction.

•  Do not adjust the vertical and 

horizontal louvers by hand.

AIR SWING

•  If automatic horizontal air

fl

 ow 

direction has been set, the louvers 
swing left and right automatically.

•  For HEATING operation, the air

fl

 ow 

louvers start to swing left/right after 
the temperature rises.

Summary of Contents for CS-E12FKR













Reviews: