Panasonic CS-C7MKP-7, Service Manual

Page: 66 / 99

66
14.2 Remote Control Button
14.2.1 SET Button
š
To check current remote control transmission code and store the transmission code to EEPROM:
o
Press “Set” button continuously for 10 seconds by using pointer.
o
Press “Timer Set” button until a “beep” sound is heard as confirmation of transmission code change.
š
To change the air quality sensor:
o
Press and release by using pointer
o
Press the Timer Decrement button to select sensitivity:
1. Low sensitivity
2. Standard (Default)
3. Hi sensitivity
o
Confirm setting by pressing Timer Set button, a “beep” sound will be heard. LCD returns to original display
after 2 seconds.
o
LCD returns to original display if remote control does not operate for 30 seconds.
14.2.2 RESET
š
To clear and restore the remote control setting to factory default.
o
Press once to clear the memory
14.2.3 TIMER
š
To change indoor unit indicators’ intensity:
o
Press continuously for 5 seconds.
14.2.4 TIMER
š
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
o
Press continuously for 10 seconds.