![Panasonic CS-C7MKP-7 Service Manual Download Page 52](http://html1.mh-extra.com/html/panasonic/cs-c7mkp-7/cs-c7mkp-7_service-manual_3948657052.webp)
52
Airflow direction (Horizontal, Vertical) Control
o
During any operation mode combines with Patrol operation, airflow direction follows respective operation
mode.
o
During Patrol individual operation if e-ion starts, only Auto Air Swing is allowed. Even if “Air Swing” button is
pressed, no signal is sent to air conditioner, and no change on LCD display.
o
During Patrol individual operation if e-ion stops, Airflow direction louver closed.
LED
display
(Applicable to all models except MKD models)
o
When Patrol operation is selected, Patrol LD illuminates.
o
During Patrol individual operation, only Patrol LED illuminates. When e-ion air purifying operation starts
based on dirtiness level, Power LED, Patrol LED and e-ion LED illuminates.
PATROL
LED
E-ION
TIMER
No Description
BLUE
ORANGE
RED
BLUE
ORANGE
1 When patrol function is not selected
OFF
OFF
OFF
-
-
2 During gas sensor error detection control
OFF
OFF
Blinking
OFF
OFF
3 During E-ion abnormal discharge error
OFF
OFF
OFF
Blinking
OFF
4 During E-ion breakdown error
OFF
OFF
OFF
Blinking
Blinking
5 During Test Mode
OFF
OFF
OFF
OFF
OFF
6 During stop
OFF
OFF
OFF
OFF
OFF
7 2 minutes gas sensor initial stabilization time (Level 0)
ON
OFF
OFF
OFF
OFF
a. Dirtiness level 0*
ON
OFF
OFF
OFF
OFF
b. Dirtiness level 1
OFF
ON
OFF
OFF
OFF
c. Dirtiness level 1*
OFF
ON
OFF
ON
OFF
8
During operation
During patrol
d. Dirtiness level 2
OFF
OFF
ON
ON
OFF
Remote Control Receiving Sound
o
Normal
Operation
Î
Patrol Mode
: Beep
o
Patrol
Mode
Î
Stop
: Long Beep
o
Patrol
Mode
Î
Normal Operation
: Beep
o
Stop
Î
Patrol
: Beep
Timer
Control
o
When ON timer activates when unit stops, previous operation resumes and restored last saved Patrol
operation status.
o
When ON timer activates during any operation, no change and carry on current operation.
o
When OFF timer activates during any operation, all operation stops and the latest Patrol operation status is
saved.
Power Failure Control
o
During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation
resumes immediately.
o
During combination operation, if power failure occurs, after power resumes combination operation resume
immediately.
Summary of Contents for CS-C7MKP-7
