46
CQ-DX200W
USB (MP3/WMA) (continued)
The player for some reason cannot read the file you are trying to play. (File recorded
in an unsupported file system, compression scheme, data format, file name
extension, damaged data, etc.)
a
Confirm that the USB extension cable is firmly connected, and reconnect if
not. Select a file that the player can read. Check the type of data stored in the
USB memory. Format the USB memory if necessary.
Display
Possible cause
a
Possible solution
No operation by some cause.
a
Turn off the power and turn on the power again, or turn the key to the ACC OFF
position and turn the key to ACC ON position again.
If this does not solve the
problem, unplug the power cord and plug it in again. In case the unit is still
out of order, consult your dealer.
(
a
Installation Instructions)
A USB device the capacity of which exceeds the acceptable current was connected.
For some reason, an over-current was detected.
a
Use a USB memory that has a consumption current of less than 500 mA.
a
Switch the source, and select the USB (MP3/WMA) mode again. (When the
USB connector section lights blue, it is normal.)
a
Check that the USB connector section is not dirty, and that there is no foreign
material.
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine
exterior cleaning. Never use benzine, thinner, or other solvents.
Maintenance/Fuse
Cleaning the
Unit
Fuse
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.
Warning
¡
Use fuses of the same specified rating (
15 A
). Using substitutes or fuses with higher ratings, or connecting the
unit directly without a fuse could cause fire or damage to the unit.
If the replaced fuse fails, contact your
nearest authorized Panasonic Service Center.
Error Display Messages (continued)
