E
N
G
L
I
S
H
4
CQ-DF602W
13
E
N
G
L
I
S
H
3
CQ-DF602W
12
General
(Continued)
Mute/Attenuation
ON: Press [MUTE].
OFF: Press again.
Setting range:
0 to 40
Open/Close the Front Panel
OPEN: Press [OPEN] on the front panel.
CLOSE: Raise the panel by hand.
: No sound.
Caution:
≥
To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥
Do not pitch your finger or hand in the front panel.
≥
Do not insert foreign matter into the disc slot.
Note:
≥
The sound level for each source is stored in
memory.
(There is one volume setting for AM radio band
and one volume setting for FM radio band.)
: Decrease the volume to
1
/
10
.
Close
Decreasing volume range depends on setting.
(
➡
page 28)
Display Change
When Power is ON
Press [DISP] (display).
Press and hold [DISP] (display) for more than 2 seconds.
≥
The audio indicator is displayed and returns to the previous display.
≥
When the indicator lights, the audio function (S
·
HDB/SUB
·
W) is now
activated.
Press [DISP] (display) again to cancel.
Display and light off (when it is turned on.)
If you press a button, the light is turned on, the mode display appears
for 5 seconds, and the light is turned off again.
When Power is OFF
Press [DISP] (display).
Mode display
Mode and spectrum analyzer display
Mode and clock display
Clock display
Display and light off
Spectrum Analyzer (S·A) display
If you press a button, the mode and spectrum analyzer display
appear for 5 seconds.
Note:
≥
Set the Spectrum Analyzer (S·A) display pattern in a separate procedure. (
➡
page 26)
≥
: Displays before adjusting the clock. (
➡
page 28)
SRC
DISP
P.SET
CQ-DF602W
N 5
O6
W
X
;
/
1
OPEN
BAND
TUNE
TRACK
PW
R
MU
TE
P
U
S
H
CD RECEIVER WITH FULL DOT MATRIX DISPLAY
DISC
SET/APM
M
EN
U
VOLUM
E
SO
UR
CE
MOSFET
50W
X
4
[VOL
"
]
[VOL
#
]
(Volume)
[MUTE]
[DISP]
(Display)
P
U
S
H
M
EN
U
VO
LUM
E
Volume
On the main unit:
Turn [VOLUME] dial
Clockwise: Up
Counterclockwise: Down
On the remote control unit:
[VOL
"
]: Up
[VOL
#
]: Down
Down
Up
