background image

CQ-C7703N/C7303N

42

Notes on Discs

How to hold the disc

¡

Do not touch the underside of the disc.

¡

Do not scratch on the disc.

¡

Do not bend the disc.

¡

When not in use, keep disc in the case.

Do not use irregularly shaped discs.

Do not leave discs in the following places:

¡

In direct sunlight

¡

Near car heaters

¡

Dirty, dusty and damp areas

¡

On seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs.

Do not write on the disc label with a ballpoint
pen or other hard-point pens.

If you use commercial CDs, they must have
either of these labels shown at right.
Some copy-protected music CDs are not
playable.

TEXT

¡

You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), either due
to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.

¡

CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving them
inside a car for extended periods may damage and make playback impossible.

¡

Some CD-R/RWs can not be played back successfully thanks to incompatibility among writing software, a CD
recorder (CD-R/RW drive) and the discs.

¡

This player cannot play the CD-R/RW discs if the session is not closed.

¡

This player cannot play the CD-R/RW discs which contains other than CD-DA or MP3/WMA data.

¡

Be sure to observe the instructions of CD-R/RW disc for handling it.

Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for
routine exterior cleaning. Never use benzine, thinner, or other solvents.

Notes on

CD-Rs/RWs

Maintenance

Cleaning the

Unit

Fuse

If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Centre.

Warning

¡

Use fuses of the same specified rating (

15 A

). Using substitutes or fuses with higher ratings, or connecting the

unit directly without a fuse could cause fire or damage to the unit.

If the replaced fuse fails, contact your

nearest authorized Panasonic Service Centre.

Printed side

<Correct>

<Wrong>

Irregularly shaped discs

Labels created by a printer

Summary of Contents for CQ-C7703N

































































Reviews: