CQ-C3305N
12
CQ-C3305N
13
English
1
Press
[SOURCE]
to select the radio
mode.
2
Press
[BAND]
to select a band.
3
Select a station.
Frequency Adjustment
[
] (TUNE)
: Higher
[
] (TUNE)
: Lower
Note:
Hold down for 0.5 sec. or more and release
for station search.
Preset Station Selection
Press the numeric button
[1]
to
[6]
.
Notes:
• For tuning in on only stations whose receiving
conditions are good in the seeking mode, set LOCAL to
ON. (
page 26)
• For reducing noise when a receiving FM stereo wave is
weak, set FM MONO to ON. (
page 26)
Radio
This chapter explains how to listen to the radio.
Band
Preset Number
Frequency
Lights while receiving an FM stereo signal.
Operation Flow
Radio Mode Display
Radio
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the
stations (SCAN). To stop scanning, press the
numeric button
[1]
to
[6]
.
Notes:
• New stations overwrite existing saved stations.
• Only RDS stations will be saved at default setting (AF
ON).
To select non-RDS stations, set AF to
OFF.
(
page 15)
Manual Station Preset
1
Tune in to a station.
2
Hold down the numeric button
[1]
to
[6]
for 2 sec. or more.
Station Preset
(APM: Auto Preset Memor
y)
Display Change
(DISP: Display)
Press
[DISP]
.
Frequency
Clock time (CT)*
Display off
* Adjust the clock when “NO CT” appears on the screen.
(Clock Adjustment
page 9)
AM (LW/MW)
Frequency
PS (Programme Service
Name)
Clock time (CT)*
Display off
FM (Non RDS)
Lights while
LOCAL
is activated.
(
page 26)
Lights while
MONO
is activated.
(
page 26)
