Display change
Press
[DISP]
to change the display.
AM (LW/MW) mode:
Band/frequency
CT
(Clock Time)
FM (not RDS) mode:
Band/frequency
PS
CT
RDS mode:
PS
(Programme Service name)
Band/frequency
CT
lights while receiving an FM stereo signal.
Band
Frequency
Preset Number
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions
can be automatically stored in the preset memory.
1
Select a band.
2
Hold down
[BAND] (APM)
for more than
2 seconds.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the buttons from
[1]
to
[6]
.
Note:
New stations overwrite existing saved stations.
Radio Source Display
Station Preset
Up to 6 stations can be preset in AM (LW/MW), FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing one of the preset buttons from
[1]
to
[6]
.
Manual station preset
1
Tune into a station.
2
Hold down one of the preset buttons from
[1]
to
[6]
for more than 2 seconds.
(blinks once)
Note:
New stations overwrite existing saved stations.
