8
Regulatory Information
For Europe
For CE marking, refer to the followings:
Declaration of Conformity (DoC)
“Hereby, Panasonic declares that this computer is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.”
Hint:
If you want to get a copy of the original DoC of our above mentioned products, please contact our web address: https://www.ptc.panasonic.eu/
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
18-E-1
Maximum radio - frequency power transmitted in the frequency bands
Type of wireless
Frequency band
Maximum transmit power
WLAN
2412 - 2472
MHz
20
dBm
5150 - 5250
MHz
(W52)
23
dBm
5250 - 5350
MHz
(W53)
23
dBm
5470 - 5725
MHz
(W56)
23
dBm
Bluetooth
2402 - 2480
MHz
20
dBm
HF-RFID (Contactless Smart Card Reader)
13.56
MHz
42
dBuA/m
at 10
m
This equipment requires minimum 20
cm
spacing from all person’s body (excluding extremities of hands, wrist and feet) in directions of the back and both sides of
the LCD display during wireless modes of operation.
60-E-1
<Only for model with external antenna>
When using Port Replicator or Car Mounter on which an external antenna can be installed:
External antenna for wireless LAN must be professionally installed.
The gain of external antenna for wireless LAN must not exceed 5
dBi
.
The user must maintain minimum of 20
cm
spacing between the external antenna and all people (excluding extremities of hands, wrist and feet) during wireless
modes of operation.
41-E-1
For UK
For your safety, please read the following text carefully.
This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 3 ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
A S A
or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
If the fitted molded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and close or attach the fuse cover.
Figure A
Figure B
Fuse cover
8-E-1
FM182_Readme(CPE03406ZA)_OI_12L.indb 8
2019/08/01 15:36:18
