manualshive.com logo in svg

Panasonic CPC-EX, Installation Manual

Share
Download
Panasonic CPC-EX Installation Manual Download Page 175

Section 300-Installation

Appendix A. EX 1.0 Feature Update

DBS-2.3/9.2-300

DBS Manual - Revised April 2000

  Page A-15

etc.), the Voice Mailbox Access Code must be reprogrammed into the 
MSG key.

DSS/72 Console - Key Arrangement

Description

The keys on the DSS/72 Console (VB-44320) are arranged differently 
from the VB-43320 model. The DSS console has 6 columns x 12 rows of 
keys (not 8 columns x 9 rows as in the previous version). This affects the 
following:

•

Name and Message Assignments (FF6 addresses).

 The alphabetical 

arrangement of the keys is different.

•

FF-Keys.

 The FF-keys on the DSS/72 console are numbered left-to-

right, bottom row first.

•

DSS #1 Defaults.

 The default extension number assignments on DSS #1 

are different.

The DSS key arrangement is shown in Figures A-7 & A-8.

Summary of Contents for CPC-EX













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands