This search covers POIs within a radius of 20 miles (32 km*) from the current
position, or from the center of the cursor.
* This is the range when “km” is set as the distance setting
(
Operating Instructions).
1
Select [Map view] on the
current position screen.
The Change map view screen
is displayed.
2
Select [Display POI icons].
The Display POI Icons screen
is displayed.
3
Select the POI icons to
search for, then select [List
Nearest POIs].
The names of POIs and their
distance from the current
position are displayed on touch
keys.
4
Select a POI from the list.
The map is displayed.
Select [Sort by] to sort the list.
[Distance]:
The list is sorted in order of
proximity.
[Category]:
The list is sorted by category.
[Name]:
The list is sorted in alphabetical
order.
Select [On route] during route
guidance to search for POIs
along the guidance route.
(
page 8)
5
Select [Enter
].
6
Select [Enter].
The All route screen is
displayed after the search is
complete.
7
Select [Start].
Route guidance starts.
Note:
This function cannot be used if POI
icons are not displayed.
The displayed distance is the straight
distance from the vehicle position
(if a nearby POI was searched for
from the current position screen), or
the straight distance from “
” (if
a nearby POI was searched for from
the map screen).
Up to 200 POIs can be searched for,
in order of proximity.
If multiple telephone numbers are
registered under the same name,
each is listed.
Search for nearby POI icons
POI icons for frequently used POIs (Gas stations, restaurants, etc.) can be displayed on the map. Detailed information can
also be shown for the displayed POI icons.
1
Select [Map view] on the
current position screen.
The Change map view screen
is displayed.
2
Select [Display POI icons].
The Display POI Icons screen
is displayed.
3
Select POI icons from the list
and select [OK].
Selected POI icons are
displayed on the map.
Up to 5 icons can be selected.
Selected POI icons are
displayed at the upper left.
Selected POI icons can be
cancelled by selecting them
again.
Select [Delete] to cancel all
selected POI icons.
To select other POI icons, select
[Other POIs]
Go to step 4
4
Select a main category.
Select [List all categories] to
display the sub-categories
within all main categories.
5
Select POI icons displayed
from the list and select [OK].
Selected POI icons are
displayed on the map.
Up to 5 icons can be selected.
To choose another category,
select [More], then repeat from
step 4.
Display POI icons
To see information on POI
icons
1
Put the cursor on POI icons,
which will cause the cursor
to fl ash.
The POI name is displayed.
2
Select [Info.].
POI information is displayed.
Note:
POI name display is automatically
removed after it has been displayed
for approximately 6 seconds.
If multiple POIs exist for the same
building, the POI icons may overlap
on the map. In that case, the POI
names are displayed sequentially as
their POI icons are selected.
Departments and sections within the
same POI may, in some cases, be
displayed as individual POI icons.
English
English
12
13
13
12
