Hook
Mounting procedures (A)
(When using Mounting collar
)
Note:
The car model, installation conditions and
combination of the units used may impose some
restrictions on opening and closing the monitor
as well as on the angle and position to which the
monitor can be adjusted.
(a) Using the Rear support strap
.
Fire wall of car
3 mm
Rear support strap
Tapping screw
(5 mm
16 mm)
Mounting bolt
(5 mm
)
Hex. nut
(5 mm
)
(b) Using the Rubber cushion (option)
Rubber bushing (option)
Rear support bracket
(Provided on the car)
Mounting bolt
(5 mm
)
Mounting and removing the unit
Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with
car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.
Select mounting screws according to the hole
positions and hole shape of the bracket.
Round head screw
(5 mm
6 mm)
Mounting procedures (B)
(When not using Mounting collar
)
Note:
Use pliers to bend the fi ngers
on the bracket vertically.
Insert the Mounting collar
into the dashboard, and bend
the mounting tabs out with a
screwdriver.
Attach the mounting spring
to the unit.
Establish the rear connection of
the unit.
After fi xing Power connector
, fi x the rear of
the unit to the car body by either method (a) or (b).
Insert the unit into Mounting
collar
.
Secure the clamp plate of Mounting collar
to the hook.
Insert trim plate
.
After installation reconnect the
negative (–) battery terminal.
Snapping point
Snapping point
Flat-Head screw
(5 mm
6 mm)
Mounting spring
Cooling fan
Do not block the area around it.
Note:
Reuse the round head screws that
fi xed the transportation brackets for
two more positions. (
page 4)
Flat-Head screw
(5 mm
6 mm)
IMPORTANT
When this unit is installed in a dashboard, ensure that there is suffi cient air fl ow around the unit to prevent damage
from overheating. Do not block any ventilation holes on the unit.
Removing procedures
Hold the unit and pull it forward until the hooks are
visible.
Remove the screwdrivers and pull the unit out with
both hands.
Method for fi xing the rear of the unit
Hook
Insert two fl athead screwdrivers between the unit and
the mounting collar, then detach the four hooks.
English
English
6
7
7
6
Summary of Contents for CN-NVD905U - Strada - Navigation System
Page 15: ...English 15 15...
