background image

Hook

Mounting procedures (A) 

(When using Mounting collar 

)

Note:

   The car model, installation conditions and 

combination of the units used may impose some 
restrictions on opening and closing the monitor 
as well as on the angle and position to which the 
monitor can be adjusted.

(a)  Using the Rear support strap 

.

Fire wall of car

3 mm

  Rear support strap

  Tapping screw 

(5 mm

 

 16 mm)

  Mounting bolt 

(5 mm

)

  Hex. nut 

(5 mm

)

(b)  Using the Rubber cushion (option)

Rubber bushing (option)

Rear support bracket 
(Provided on the car)

  Mounting bolt 

(5 mm

)

Mounting and removing the unit

Use the brackets supplied with your car when mounting this unit. The bracket shape and mounting method vary with 
car manufacturers, car types and manufacturing year. Please consult your nearest dealer or installer.

Select mounting screws according to the hole 
positions and hole shape of the bracket.

  Round head screw 

(5 mm

 

 6 mm)

Mounting procedures (B) 

(When not using Mounting collar 

)

Note:

Use pliers to bend the fi ngers 
on the bracket vertically.

 Insert the Mounting collar 

 

into the dashboard, and bend 
the mounting tabs out with a 
screwdriver.

 Attach the mounting spring 

 

to the unit.

Establish the rear connection of 
the unit.

After fi xing Power connector 

, fi x the rear of 

the unit to the car body by either method (a) or (b).

Insert the unit into Mounting 
collar 

.

Secure the clamp plate of Mounting collar 

 

to the hook.

Insert trim plate 

.

After installation reconnect the 
negative (–) battery terminal.

Snapping point

Snapping point

  Flat-Head screw 

(5 mm

 

 6 mm)

  Mounting spring

Cooling fan
Do not block the area around it.

Note:

Reuse the round head screws that 
fi xed the transportation brackets for 
two more positions. (

 page 4)

  Flat-Head screw 

(5 mm

 

 6 mm)

IMPORTANT

When this unit is installed in a dashboard, ensure that there is suffi cient air fl ow around the unit to prevent damage 
from overheating. Do not block any ventilation holes on the unit.

  Removing  procedures

 

 

Hold the unit and pull it forward until the hooks are 
visible.

  Remove the screwdrivers and pull the unit out with 

both hands.

  Method for fi xing the rear of the unit

Hook

  Insert two fl athead screwdrivers between the unit and 

the mounting collar, then detach the four hooks.

English

English

6

7

7

6

Summary of Contents for CN-NVD905U - Strada - Navigation System

















Reviews: