CM602-L
Reference Manual
1.4 Other Specifications
Page 1-28
<Vacuum sensor setting procedure>
1.
Select the channels to be set, using
and
keys.
2.
Change the pressure value using
and
keys, and accept your entry by
pressing
.
•
This step covers the setting of pressure value
(H
−
).
Indication example:
H
−
1
⇔
−
46.0
Alternately
∗
For setting values, refer to the specifications
(the setting values of vacuum sensor below).
3.
Change the pressure value using
and
keys, and accept your entry by
pressing
.
•
This step covers the setting of pressure value
(h
−
).
Indication example:
h
−
1
⇔
−
1.0
Alternately
∗
For setting values, refer to the specifications
(the setting values of vacuum sensor below).
[Setting values of vacuum sensor]
H
−
1 = P0
+
1.0
h
−
1 =
−
1.0
H
−
2 =
−
10 (Original setting value:
−
20)
h
−
2 = 0
H
−
3 = P0
+
1.0
h
−
3 =
−
1.0
H
−
4 =
−
10 (Original setting value:
−
20)
h
−
4 = 0
P0: Vacuum pressure of 1003 nozzle
Setting procedures of vacuum sensor (Example: For CM20/CM120/CM100)
Make the setting on each head. (Three indicators need to be set.)
1.
Change the settings of pressure values.
Setting value P3 (Original setting value:
−
149
)
⇒ −
74
Setting value P4 (Original setting value:
−
150
)
⇒ −
75
(How to check)
Pressing
toggles an indication in order
(P
−
1,
…
P
−
5), alternating with the setting value.
(How to change the settings)
Change the setting values, using
and
keys.
EJM4A-E-RMA01-A01-00