![background image](http://html1.mh-extra.com/html/panasonic/cj-hdr216/cj-hdr216_quick-start-manual_3610868039.webp)
35
Please make sure the speed domes A/B cables are properly connected to the A/B ports of
DVR.
You have properly set PTZ information.
Please switch camera monitor channel to current window.
2.9.1 Pan/Tilt/Zoom Setup
In the main menu, from Setting -> General -> Pan/Tilt/Zoom, you can see the following interface.
The Pan/Tilt/Zoom setup includes the following items. Please select channel first. See Figure
2-25.
Protocol: Select corresponding PTZ protocol.
Address: Input corresponding PTZ address.
Baud rate: Select baud rate.
Data bit: Select data bit. Default value is 8.
Stop bit: Select stop bit. Default value is 1.
Parity: There are five choices: none/odd/even/mark/space. Default value is none.
Figure 2-25
After completing all the setups please click save button, system goes back to the previous menu.
2.9.2 Pan/Tilt/Zoom Operation
In one window display mode, right click mouse, the interface is shown as in Figure 2-26.