![background image](http://html1.mh-extra.com/html/panasonic/cj-hdr216/cj-hdr216_quick-start-manual_3610868011.webp)
7
SN Icon
Name
Note
10
AUDIO
OUT
Audio output
port
Connect to video output device such as sound box.
The rear panel of CJ-HDR416 is shown as below. See Figure 1-4.
Figure 1-4
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power switch
Power on/off button.
2
RS-232
RS-232 debug COM.
It is for general COM debug to
configure IP address or transfer
transparent COM data.
3
1
~
16
Alarm input port 1
~
16
There are four groups. The
first group is from port 1 to
port 4, the second group is
from port 5 to port 8, the
third group is from 9 to 12,
and the fourth group is
from 13 to 16. They are to
receive the signal from the
external alarm source.
There are two types; NO
(normal open)/NC (normal
close).
When your alarm input
device is using external
power, please make sure
the device and the DVR
have the same ground.
NO1
~
NO5
Alarm output port 1
~
5
5 groups of alarm output
ports. (Group 1
:
port
NO1
~
C1, Group 2: port
C1
~
C5