26
T
ro
u
b
leshooting
If the DVD-ROM & CD-R/
RW drive vibrates exces-
sively or is noisy
Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [start]
*
1
- [Run] to reinstall the program. When installing the program, do not change the installa-
tion destination folder. If the destination folder is changed, the Reference Manual cannot
be opened from [start]
*
1
menu.
*
1
Windows 2000
:
[
Start]
Reference Manual
The Reference Manual is
not displayed
SD Card Setup (SD memory card security function)
Some applications may not
work properly
Fast User Switching Function
Windows XP
When switching to a different user with the Fast User Switching function, the following
problems may occur.
• Some applications may not work properly.
• Key combination with
Fn
may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
• The B’s CLiP icon will no longer be shown on the taskbar and a CD-RW disc cannot be
written on.
In this case, log off all users, and try the operation once more. If the problem persists,
restart the computer.
Is the disc bent or labeled?
Check to see if the disc is inserted correctly, and check that the disc is in good condition.
If the disc is good and inserted correctly, set [DVD Drive Speed] to [Low] in the Setup
Utility. (
“Setup Utility”)
Disk Operations
Dealing with Problems
(Summary)
Cannot log on with the SD
memory card
Windows logon user name and password are not set in the SD memory card correctly.
Enter the Windows user name and password without using the SD memory card.
After logging on, reset the SD memory card, or use the [Control Panel] to create a user
with the user name and password set on the SD memory card. (
“SD Memory
Card/MultiMedia Card”)
No response
Press
Ctrl
+
Shift
+
Esc
to open Task Manager and close the software application
which is not responding.
After shutting down by sliding the power switch for more than four seconds, slide the
power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu.
Then reinstall the program.
Windows XP
: [start] - [Control Panel] - [Add or Remove Programs]
Windows 2000
: [Start] - [Settings] - [Control Panel] - [Add/Remove Programs]
Others
Summary of Contents for CF-W2 Series
Page 47: ...47 Appendix Memo...
