14
Getting Star
ted
First-time Operation
7
At [Networking Settings], select [Typical settings], then select [Next].
8
At [Workgroup or Computer Domain], select [No, this computer is not on a
network, or is on a network without a domain], then select [Next].
The computer will restart.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated.
When creating a new user account:
If you make mail settings, create password reset disks (
page 16), or
conduct other related operations before creating the user account, you will
be unable to use any previous mail history or settings.
When you create the first new account, you can only select [Computer ad-
ministrator].
Once a "Computer Administrator" account has been created, you can create
additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome
screen. The account for the administrator created during Windows setup will
not be displayed.
NOTE
If "Yes, make this computer a member of the following domain" is se-
lected, the following message may be displayed: [An invalid domain was
specified. Would you like to proceed for now and try joining a domain
later?]. In this case, select [Yes]. After selecting [Yes], the computer will
restart automatically, but sometimes the [Starting Windows] message will
remain on the screen, and windows will not start up. If this happens, hold
Alt
down while pressing
Tab
until [Network Identification Wizard]
is displayed on top, and follow the instructions on the screen.
9
Enter your administrator password and select
.
10
Select [start]-[Control Panel]-[User Accounts]-[Create a new account] and follow
the instructions on the display to create a user account, then restart the computer.
NOTE
5
Enter your computer name and administrator password and then select [Next].
NOTE
It may take two to three minutes until the next screen is displayed. Wait,
and do not press any keys, or touch the touch pad, etc.
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated. You can create a password reset disk beforehand (
page 16).
If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless
LAN adaptor.] is displayed, select [Yes].
If you use the wireless LAN, be sure to refer to the Reference Manual’s “Wire-
less LAN”.
6
Enter your correct date, time and the time zone, then select [Next].
NOTE
Summary of Contents for CF-W2 Series
Page 47: ...47 Appendix Memo...
