
Disc cannot be removed.
(Disc cover will not
open.)
Is the drive still operating?
•
While data is being written on the CD-R or CD-RW disc, the
disc cover will not open even when the open button is pressed.
Wait until the data writing is completed.
•
When [B’s CLiP] is used, move the cursor to the icon
displayed on the noti
fi
cation area and right-click to select
[Eject].
•
If the disc cover fails to open even when [Eject] has been
clicked, operate the emergency open lever (
page 8 (D)).
The drive is not
recognized by writing
software other than
the one provided.
It is not possible to use writing software that does not support
the drive.
How to add data using
multiple CD-R/CD-RW
drives or multiple kinds
of writing software?
Use the same drive and same writing software to write data.
Otherwise, it may not be possible to either read the data
before it is added or read or write the data correcting using the
drive or another drive.
DVD-R or DVD-RW
discs cannot be read.
Is the media format or writing system of the DVD disc used the
correct one?
•
The DVD-R discs that can be used with this drive must support
4.7 GB (For General/Authoring) and 3.95 GB version 1.1;
similarly, the DVD-RW discs that can be used must support
4.7 GB version 1.1/1.2.
Furthermore, only discs with data recorded using the Disc-
at-Once system as the writing system can be read. Check the
media format and writing system of the discs used.
B’s Recorder and B’s
CLiP does not operate
p r o p e r l y ( W h e n
installing Media Player
7 or Media Player 9
under Windows 2000)
Uninstall Adaptec CD-Burning Plug-in (
page 21).
•
If Windows Media Player 7 has been installed, update it to
Windows Media Player 9 by installing PowerDVD and uninstall
the CD Burning Plug-in.
If data is written
with B’s Recorder
using USB1.1 port,
the “XX transmission
speed error, but were
circumvented” message
appears.
This means that transmission failed but that the error was
circumvented so no problems are posed.
32
Troubleshooting
CF-VDRRT3U.indb 32
CF-VDRRT3U.indb 32
2007/03/23 11:00:52
2007/03/23 11:00:52